原理
针从轨道中取防水栓,将防水栓转移到管上,再将装上防水栓的管子放于爪中,爪上有圆锥状导线孔。线穿入导线孔,抽出管,防水栓就落在线上。可以先剥皮再穿防水栓。
![1557883200808653.jpg 加工示例图.jpg](/static/upload/image/20190515/1557883200808653.jpg)
换型
![1558060211337670.jpg 大小配套.jpg](/static/upload/image/20190517/1558060211337670.jpg)
ASM400应用于汽车线束的防水栓Seal组装。其安装于自动开线机作为一个工作站,例如KOMAX,Schleuniger,MAKFIL等品牌的自动开线机案。
![1656577133564404.png image.png](/static/upload/image/20220630/1656577133564404.png)
机型适用自动机
1.KOMAX
2.SCHLEUNIGER
3.THB
4.ARTOS
5.Others
防水栓换型仅需要更换轨道、针、管、爪。十分方便快捷,无需工具,二分钟换型。
![1557825861107321.jpg 大配套.jpg](/static/upload/image/20190514/1557825861107321.jpg)
![1557826075382079.jpg 小配套.jpg](/static/upload/image/20190514/1557826075382079.jpg)
去油机: 机型适用自动机
1. 遮盖可被动式旋转 1. KOMAX
2. 气动搅拌清洁 2. Schleuniger
3. 双无刷马达 3. THB
4. 可移开式滚筒 4. Artos
5. 特殊橡胶防滑轮 5. Others
![1557826388777369.jpg 去油机.jpg](http://h8g2z3.muzl.cn/static/upload/image/20190514/1557826388777369.jpg)
Manual Seal Load Machine/手工穿栓机:
ASM400-M是由ASM400的改造而成,用于手工穿栓。此设备使用的轨道和PTJ与原有ASM400上的完全兼容。
The ASM400-M is upgrade from ASM400, is used to manual seal load. The track and PTJ used in this device are fully compatible with those on the original ASM400.
![1693195165529721.png](/static/upload/image/20230828/1693195165529721.png)
(ASM400-M)  
线外径 | 1-6mm(ASM400=ASM400-M) |
防水栓尺寸 | 高度和外径小于17mm(ASM400);小于15mm(ASM400-M) |
加工时间 | Approx. 0.22s(ASM400);0.7-1s(ASM400-M) |
机器循环时间 | Approx. 0.9s (Depend on Air Pressure) (ASM400) |
电源 | 100~220VAC 50Hz 200W |
气源 | 5.5~7 Bar
|
包装尺寸 | L1000*W800*H350mm(ASM400);L100*W800*H400(ASM400-M) |
重量 | 20KG(ASM400);35KG(ASM400-M) |
Important Notice:ASTI recommends that samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine |